From cf4575b94a3c65e6535a159fc71fc885aebc2620 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 2 Aug 2019 14:02:40 -0700 Subject: Fix the LUFA lib to use a submodule instead of just files (#6245) * Remove LUFA files * Update descriptions for newer version of LUFA * Create PR6245.md * Fix CDC(Serial) type errors * Fix missed merge conflict for AUDIO_DTYPE_CSInterface --- lib/lufa/Projects/XPLAINBridge/XPLAINBridge.txt | 89 ------------------------- 1 file changed, 89 deletions(-) delete mode 100644 lib/lufa/Projects/XPLAINBridge/XPLAINBridge.txt (limited to 'lib/lufa/Projects/XPLAINBridge/XPLAINBridge.txt') diff --git a/lib/lufa/Projects/XPLAINBridge/XPLAINBridge.txt b/lib/lufa/Projects/XPLAINBridge/XPLAINBridge.txt deleted file mode 100644 index 0cf59a67d7..0000000000 --- a/lib/lufa/Projects/XPLAINBridge/XPLAINBridge.txt +++ /dev/null @@ -1,89 +0,0 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage XPLAIN UART Bridge/PDI Programmer Project - * - * \section Sec_Compat Project Compatibility: - * - * The following list indicates what microcontrollers are compatible with this project. - * - * \li AT90USB1287 - * - * \section Sec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this project. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
USB Mode:1) Device2) Device
USB Class:1) Communications Device Class (CDC)2) Vendor Specific Class
USB Subclass:1) Abstract Control Model (ACM)2) N/A
Relevant Standards:1) USBIF CDC Class Standard2) Atmel AVRISP MKII Protocol Specification
Supported USB Speeds:1) Full Speed Mode2) Full Speed Mode
- * - * \section Sec_Description Project Description: - * - * This project serves a dual purpose. When loaded into the USB AVR on the XPLAIN board, it will act as either a USB to Serial - * converter for the XPLAIN's hardware USART (at a speed of 9600 baud), or an AVRStudio compatible PDI programmer for the XMEGA. - * This project replaces the firmware preloaded onto the XPLAIN's onboard AT90USB1287 microcontroller. - * - * When power to the board is applied, the TDI pin (pin 9) of the USB AVR's JTAG port is read. If the pin is left high, the device - * will enumerate as a regular COM port on the host, which can then be opened and data exchanged between the XMEGA and Host as if - * the XMEGA was connected directly to the host's serial port. If the pin is pulled low by shorting it to GND (pin 10), the device - * will enumerate as an AVRISP-MKII to the host, so that the XMEGA can be reprogrammed by AVRStudio or other compatible software - * such as avrdude by connecting to the board as if it was an Atmel AVRISP-MKII programmer. - * - * After running this project in serial bridge mode for the first time on a new computer, you will need to supply the .INF file - * located in this project project's directory as the device's driver when running under Windows. This will enable Windows to use - * its inbuilt CDC virtual serial drivers, negating the need for custom drivers for the device. Other Operating Systems should - * automatically use their own inbuilt CDC-ACM drivers. - * - * In serial bridge mode, the UART baud rate can be altered through the host terminal software to select a new baud rate - the default - * baud is 9600. Note that parity, data bits and stop bits are fixed at none, eight and one respectively can cannot be altered. Changes - * to the connection's parity, data bits or stop bits are ignored by the firmware. As the serial link between the controllers on the - * XPLAIN is software emulated by the USB AVR, not all baud rates will work correctly. - * - * This project relies on files from the LUFA AVRISP-MKII project for compilation. - * - * \section Sec_Options Project Options - * - * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. - * - * - * - * - * - * - * - * - * - * - * - * - *
Define Name:Location:Description:
FIRMWARE_VERSION_MINORAppConfig.hDefine to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible - * with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here.
- */ - -- cgit v1.2.3