From 17794e0b2502371eaf155328d4e4195aef703163 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Fri, 27 Sep 2019 21:33:55 +0100 Subject: ARM split - Add support for dfu-util EE_HANDS flashing (#6543) * Initial stab at some fake dfu-util-split-left behaviour * Apply suggestions from code review Co-Authored-By: fauxpark * Clang format fixes * Fake eeprom init for both left and right hand --- docs/flashing.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'docs/flashing.md') diff --git a/docs/flashing.md b/docs/flashing.md index 00350b8406..18ae6364d4 100644 --- a/docs/flashing.md +++ b/docs/flashing.md @@ -232,4 +232,6 @@ Flashing sequence: There are a number of DFU commands that you can use to flash firmware to a STM32 device: * `:dfu-util` - The default command for flashing to STM32 devices. -* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. +* `:dfu-util-split-left` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Left Side" EEPROM setting for split keyboards. +* `:dfu-util-split-right` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Right Side" EEPROM setting for split keyboards. +* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. -- cgit v1.2.3