5 files changed, 15 insertions, 21 deletions
diff --git a/tmk_core/protocol/arm_atsam/adc.c b/tmk_core/protocol/arm_atsam/adc.c
index ab77f92402..cb5c349b73 100644
--- a/tmk_core/protocol/arm_atsam/adc.c
+++ b/tmk_core/protocol/arm_atsam/adc.c
@@ -74,9 +74,9 @@ void ADC0_init(void)
     while (ADC0->SYNCBUSY.bit.SAMPCTRL) { DBGC(DC_ADC0_SAMPCTRL_SYNCING_1); }
 
     //Load factory calibration data
-    ADC0->CALIB.bit.BIASCOMP = (ADC0_FUSES_BIASCOMP_ADDR >> ADC0_FUSES_BIASCOMP_Pos) & ADC0_FUSES_BIASCOMP_Msk;
-    ADC0->CALIB.bit.BIASR2R = (ADC0_FUSES_BIASR2R_ADDR >> ADC0_FUSES_BIASR2R_Pos) & ADC0_FUSES_BIASR2R_Msk;
-    ADC0->CALIB.bit.BIASREFBUF = (ADC0_FUSES_BIASREFBUF_ADDR >> ADC0_FUSES_BIASREFBUF_Pos) & ADC0_FUSES_BIASREFBUF_Msk;
+    ADC0->CALIB.bit.BIASCOMP = ((*(uint32_t *)ADC0_FUSES_BIASCOMP_ADDR) & ADC0_FUSES_BIASCOMP_Msk) >> ADC0_FUSES_BIASCOMP_Pos;
+    ADC0->CALIB.bit.BIASR2R = ((*(uint32_t *)ADC0_FUSES_BIASR2R_ADDR) & ADC0_FUSES_BIASR2R_Msk) >> ADC0_FUSES_BIASR2R_Pos;
+    ADC0->CALIB.bit.BIASREFBUF = ((*(uint32_t *)ADC0_FUSES_BIASREFBUF_ADDR) & ADC0_FUSES_BIASREFBUF_Msk) >> ADC0_FUSES_BIASREFBUF_Pos;
 
     //Enable
     ADC0->CTRLA.bit.ENABLE = 1;
diff --git a/tmk_core/protocol/bluefruit/main.c b/tmk_core/protocol/bluefruit/main.c
index 0dbb637e2c..8a6386b4eb 100644
--- a/tmk_core/protocol/bluefruit/main.c
+++ b/tmk_core/protocol/bluefruit/main.c
@@ -42,13 +42,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 int main(void)
-{   
+{
 
     CPU_PRESCALE(0);
 
     // DDRD  = _BV(PD5);
     // DDRB  = _BV(PB0);
-    
+
     // PORTD = _BV(PD5);
     // PORTB = _BV(PB0);
 
@@ -59,22 +59,23 @@ int main(void)
     // while (!usb_configured()) /* wait */
 
 
+    keyboard_setup();
 
     dprintf("Initializing keyboard...\n");
     keyboard_init();
-    
+
     // This implementation is pretty simplistic... if the USB connection
     // is not configured, choose the Bluefruit, otherwise use USB
     // Definitely would prefer to have this driven by an input pin and make
     // it switch dynamically - BCG
     // if (!usb_configured()) {
-    
+
     //     // Send power to Bluefruit... Adafruit says it takes 27 mA, I think
-    //     // the pins should provide 40 mA, but just in case I switch the 
+    //     // the pins should provide 40 mA, but just in case I switch the
     //     // Bluefruit using a transistor - BCG
     //     DDRB   = _BV(PB6);
     //     PORTB |= _BV(PB6);
-    
+
         dprintf("Setting host driver to bluefruit...\n");
         host_set_driver(bluefruit_driver());
 
@@ -131,7 +132,7 @@ int main(void)
 //                     usb_remote_wakeup();
 //                 }
 //             }
-//             keyboard_task(); 
+//             keyboard_task();
 //         }
 //     }
 
diff --git a/tmk_core/protocol/chibios/main.c b/tmk_core/protocol/chibios/main.c
index 5436d49090..8de55bfe3f 100644
--- a/tmk_core/protocol/chibios/main.c
+++ b/tmk_core/protocol/chibios/main.c
@@ -119,6 +119,8 @@ int main(void) {
   // TESTING
   // chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
 
+  keyboard_setup();
+
   /* Init USB */
   init_usb_driver(&USB_DRIVER);
 
diff --git a/tmk_core/protocol/usb_hid/test/config.h b/tmk_core/protocol/usb_hid/test/config.h
index c2230fb570..71a6814fd1 100644
--- a/tmk_core/protocol/usb_hid/test/config.h
+++ b/tmk_core/protocol/usb_hid/test/config.h
@@ -15,9 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
-
+#pragma once
 
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0xCAFE
@@ -25,16 +23,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MANUFACTURER    t.m.k.
 #define PRODUCT         USB to USB keyboard converter
 
-
 #define DESCRIPTION     Product from t.m.k. keyboard firmware project
 
-
 /* matrix size */
 #define MATRIX_ROWS 32
 #define MATRIX_COLS 8
-
-
-/* key combination for command */
-#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT))) 
-
-#endif
diff --git a/tmk_core/protocol/vusb/main.c b/tmk_core/protocol/vusb/main.c
index f6a0c7e9a4..86c2188c87 100644
--- a/tmk_core/protocol/vusb/main.c
+++ b/tmk_core/protocol/vusb/main.c
@@ -56,6 +56,7 @@ int main(void)
 #ifndef NO_UART
     uart_init(UART_BAUD_RATE);
 #endif
+    keyboard_setup();
 
     keyboard_init();
     host_set_driver(vusb_driver());