diff options
Diffstat (limited to 'keyboards/takashiski/hecomi')
-rw-r--r-- | keyboards/takashiski/hecomi/alpha/config.h | 43 | ||||
-rw-r--r-- | keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c | 6 |
2 files changed, 3 insertions, 46 deletions
diff --git a/keyboards/takashiski/hecomi/alpha/config.h b/keyboards/takashiski/hecomi/alpha/config.h index 05f1d35c83..5c5cc2065a 100644 --- a/keyboards/takashiski/hecomi/alpha/config.h +++ b/keyboards/takashiski/hecomi/alpha/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ //#define MATRIX_ROWS 5 @@ -47,10 +46,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ //#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D4 #ifdef RGB_DI_PIN #define RGBLED_NUM 16 @@ -69,45 +64,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_ALTERNATING #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -124,10 +85,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 -// /* #define USE_I2C #define MASTER_LEFT diff --git a/keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c b/keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c index a42a87c65f..fb61d8ed62 100644 --- a/keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c +++ b/keyboards/takashiski/hecomi/keymaps/kakunpc/keymap.c @@ -28,21 +28,21 @@ enum layers{ #define KC_LW MO(LW) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [DF]=LAYOUT(\ + [DF]=LAYOUT( KC_ESC,KC_GRV,KC_1,KC_2,KC_3,KC_4,KC_5, KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC, KC_TAB ,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y, KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_LCTL ,KC_A,KC_S,KC_D,KC_F,KC_G, KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_ENT, KC_LSFT ,KC_Z,KC_X,KC_C,KC_V,KC_B, KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,KC_DEL, KC_LGUI,KC_NO,KC_LALT,KC_LW,LT_F13,KC_SPC, KC_SPC,LT_F14,KC_LEFT,KC_UP,KC_DOWN,KC_RIGHT ), - [LW]=LAYOUT(\ + [LW]=LAYOUT( RGB_TOG,KC_NO,RGB_VAD,RGB_VAI,RGB_HUI,RGB_HUD,KC_TRNS, RGB_MOD,RGB_RMOD,KC_TRNS,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO ,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO ), - [FN]=LAYOUT(\ + [FN]=LAYOUT( KC_ESC,KC_GRV,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5, KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_BSPC, KC_TAB ,KC_NO,KC_UP,KC_NO,KC_NO,KC_NO,KC_NO, KC_7,KC_8,KC_0,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, KC_LCTL ,KC_LEFT,KC_DOWN,KC_RIGHT,KC_NO,KC_NO, KC_4,KC_5,KC_6,KC_NO,KC_NO,KC_NO,KC_NO, |