diff options
Diffstat (limited to 'keyboards/hhkb')
35 files changed, 2538 insertions, 0 deletions
diff --git a/keyboards/hhkb/Makefile b/keyboards/hhkb/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/hhkb/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/hhkb/config.h b/keyboards/hhkb/config.h new file mode 100644 index 0000000000..3f0528b4b9 --- /dev/null +++ b/keyboards/hhkb/config.h @@ -0,0 +1,75 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xCAFE +#define DEVICE_VER 0x0104 +#define MANUFACTURER q.m.k +#define PRODUCT HHKB mod +#define DESCRIPTION q.m.k keyboard firmware for HHKB + +/* key matrix size */ +#ifdef HHKB_JP +# define MATRIX_ROWS 16 +#else +# define MATRIX_ROWS 8 +#endif +#define MATRIX_COLS 8 + +#define TAPPING_TERM 200 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. +*/ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/hhkb/hhkb.c b/keyboards/hhkb/hhkb.c new file mode 100644 index 0000000000..a9d35123ff --- /dev/null +++ b/keyboards/hhkb/hhkb.c @@ -0,0 +1 @@ +#include "hhkb.h"
\ No newline at end of file diff --git a/keyboards/hhkb/hhkb.h b/keyboards/hhkb/hhkb.h new file mode 100644 index 0000000000..e95125efcb --- /dev/null +++ b/keyboards/hhkb/hhkb.h @@ -0,0 +1,51 @@ +#ifndef HHKB_H +#define HHKB_H + +#include "quantum.h" + +#define KEYMAP( \ + K31, K30, K00, K10, K11, K20, K21, K40, K41, K60, K61, K70, K71, K50, K51, \ + K32, K01, K02, K13, K12, K23, K22, K42, K43, K62, K63, K73, K72, K52, \ + K33, K04, K03, K14, K15, K24, K25, K45, K44, K65, K64, K74, K53, \ + K34, K05, K06, K07, K16, K17, K26, K46, K66, K76, K75, K55, K54, \ + K35, K36, K37, K57, K56) \ + \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, KC_NO }, \ + { K50, K51, K52, K53, K54, K55, K56, K57 }, \ + { K60, K61, K62, K63, K64, K65, K66, KC_NO }, \ + { K70, K71, K72, K73, K74, K75, K76, KC_NO } \ +} + + +#define KEYMAP_JP( \ + K02, K32, K62, K22, K12, K52, K72, KA2, K92, K82, KB2, KE2, KF2, KD2, KC2, \ + K03, K63, K23, K13, K53, K73, KA3, K93, K83, KB3, KE3, KF3, KD3, \ + K06, K66, K26, K16, K56, K76, KA6, K96, K86, KB6, KE6, KF6, KD6, KC6, \ + K05, K65, K25, K15, K55, K75, KA5, K95, K85, KB5, KE5, KF5, KD5, KC5, \ + K04, K34, K64, K24, K14, K74, K94, K84, KB4, KE4, KF4, KD4, KC4) \ +{ \ + { KC_NO, KC_NO, K02, K03, K04, K05, K06, KC_NO }, \ + { KC_NO, KC_NO, K12, K13, K14, K15, K16, KC_NO }, \ + { KC_NO, KC_NO, K22, K23, K24, K25, K26, KC_NO }, \ + { KC_NO, KC_NO, K32, KC_NO, K34, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, K52, K53, KC_NO, K55, K56, KC_NO }, \ + { KC_NO, KC_NO, K62, K63, K64, K65, K66, KC_NO }, \ + { KC_NO, KC_NO, K72, K73, K74, K75, K76, KC_NO }, \ + { KC_NO, KC_NO, K82, K83, K84, K85, K86, KC_NO }, \ + { KC_NO, KC_NO, K92, K93, K94, K95, K96, KC_NO }, \ + { KC_NO, KC_NO, KA2, KA3, KC_NO, KA5, KA6, KC_NO }, \ + { KC_NO, KC_NO, KB2, KB3, KB4, KB5, KB6, KC_NO }, \ + { KC_NO, KC_NO, KC2, KC_NO, KC4, KC5, KC6, KC_NO }, \ + { KC_NO, KC_NO, KD2, KD3, KD4, KD5, KD6, KC_NO }, \ + { KC_NO, KC_NO, KE2, KE3, KE4, KE5, KE6, KC_NO }, \ + { KC_NO, KC_NO, KF2, KF3, KF4, KF5, KF6, KC_NO } \ +} + + +#endif diff --git a/keyboards/hhkb/hhkb_avr.h b/keyboards/hhkb/hhkb_avr.h new file mode 100644 index 0000000000..7ea6322c73 --- /dev/null +++ b/keyboards/hhkb/hhkb_avr.h @@ -0,0 +1,167 @@ +#ifndef HHKB_AVR_H +#define HHKB_AVR_H + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <avr/interrupt.h> +#include <util/delay.h> + + +// Timer resolution check +#if (1000000/TIMER_RAW_FREQ > 20) +# error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB." +#endif + + +/* + * HHKB Matrix I/O + * + * row: HC4051[A,B,C] selects scan row0-7 + * row-ext: [En0,En1] row extention for JP + * col: LS145[A,B,C,D] selects scan col0-7 and enable(D) + * key: on: 0/off: 1 + * prev: hysteresis control: assert(1) when previous key state is on + */ + + +#if defined(__AVR_ATmega32U4__) +/* + * For TMK HHKB alt controller(ATMega32U4) + * + * row: PB0-2 + * col: PB3-5,6 + * key: PD7(pull-uped) + * prev: PB7 + * power: PD4(L:off/H:on) + * row-ext: PC6,7 for HHKB JP(active low) + */ +static inline void KEY_ENABLE(void) { (PORTB &= ~(1<<6)); } +static inline void KEY_UNABLE(void) { (PORTB |= (1<<6)); } +static inline bool KEY_STATE(void) { return (PIND & (1<<7)); } +static inline void KEY_PREV_ON(void) { (PORTB |= (1<<7)); } +static inline void KEY_PREV_OFF(void) { (PORTB &= ~(1<<7)); } +#ifdef HHKB_POWER_SAVING +static inline void KEY_POWER_ON(void) { + DDRB = 0xFF; PORTB = 0x40; // change pins output + DDRD |= (1<<4); PORTD |= (1<<4); // MOS FET switch on + /* Without this wait you will miss or get false key events. */ + _delay_ms(5); // wait for powering up +} +static inline void KEY_POWER_OFF(void) { + /* input with pull-up consumes less than without it when pin is open. */ + DDRB = 0x00; PORTB = 0xFF; // change pins input with pull-up + DDRD |= (1<<4); PORTD &= ~(1<<4); // MOS FET switch off +} +static inline bool KEY_POWER_STATE(void) { return PORTD & (1<<4); } +#else +static inline void KEY_POWER_ON(void) {} +static inline void KEY_POWER_OFF(void) {} +static inline bool KEY_POWER_STATE(void) { return true; } +#endif +static inline void KEY_INIT(void) +{ + /* row,col,prev: output */ + DDRB = 0xFF; + PORTB = 0x40; // unable + /* key: input with pull-up */ + DDRD &= ~0x80; + PORTD |= 0x80; +#ifdef HHKB_JP + /* row extention for HHKB JP */ + DDRC |= (1<<6|1<<7); + PORTC |= (1<<6|1<<7); +#endif + KEY_UNABLE(); + KEY_PREV_OFF(); + + KEY_POWER_OFF(); +} +static inline void KEY_SELECT(uint8_t ROW, uint8_t COL) +{ + PORTB = (PORTB & 0xC0) | (((COL) & 0x07)<<3) | ((ROW) & 0x07); +#ifdef HHKB_JP + if ((ROW) & 0x08) PORTC = (PORTC & ~(1<<6|1<<7)) | (1<<6); + else PORTC = (PORTC & ~(1<<6|1<<7)) | (1<<7); +#endif +} + + +#elif defined(__AVR_AT90USB1286__) +/* + * For Teensy++(AT90USB1286) + * + * HHKB pro HHKB pro2 + * row: PB0-2 (6-8) (5-7) + * col: PB3-5,6 (9-12) (8-11) + * key: PE6(pull-uped) (4) (3) + * prev: PE7 (5) (4) + * + * TODO: convert into 'staitc inline' function + */ +#define KEY_INIT() do { \ + DDRB |= 0x7F; \ + DDRE |= (1<<7); \ + DDRE &= ~(1<<6); \ + PORTE |= (1<<6); \ +} while (0) +#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \ + (((COL) & 0x07)<<3) | \ + ((ROW) & 0x07)) +#define KEY_ENABLE() (PORTB &= ~(1<<6)) +#define KEY_UNABLE() (PORTB |= (1<<6)) +#define KEY_STATE() (PINE & (1<<6)) +#define KEY_PREV_ON() (PORTE |= (1<<7)) +#define KEY_PREV_OFF() (PORTE &= ~(1<<7)) +#define KEY_POWER_ON() +#define KEY_POWER_OFF() +#define KEY_POWER_STATE() true + + +#else +# error "define code for matrix scan" +#endif + + +#if 0 +// For ATMega328P with V-USB +// +// #elif defined(__AVR_ATmega328P__) +// Ports for V-USB +// key: PB0(pull-uped) +// prev: PB1 +// row: PB2-4 +// col: PC0-2,3 +// power: PB5(Low:on/Hi-z:off) +#define KEY_INIT() do { \ + DDRB |= 0x3E; \ + DDRB &= ~(1<<0); \ + PORTB |= 1<<0; \ + DDRC |= 0x0F; \ + KEY_UNABLE(); \ + KEY_PREV_OFF(); \ +} while (0) +#define KEY_SELECT(ROW, COL) do { \ + PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \ + PORTC = (PORTC & 0xF8) | ((COL) & 0x07); \ +} while (0) +#define KEY_ENABLE() (PORTC &= ~(1<<3)) +#define KEY_UNABLE() (PORTC |= (1<<3)) +#define KEY_STATE() (PINB & (1<<0)) +#define KEY_PREV_ON() (PORTB |= (1<<1)) +#define KEY_PREV_OFF() (PORTB &= ~(1<<1)) +// Power supply switching +#define KEY_POWER_ON() do { \ + KEY_INIT(); \ + PORTB &= ~(1<<5); \ + _delay_ms(1); \ +} while (0) +#define KEY_POWER_OFF() do { \ + DDRB &= ~0x3F; \ + PORTB &= ~0x3F; \ + DDRC &= ~0x0F; \ + PORTC &= ~0x0F; \ +} while (0) +#endif + +#endif diff --git a/keyboards/hhkb/keymaps/blakedietz/Makefile b/keyboards/hhkb/keymaps/blakedietz/Makefile new file mode 100644 index 0000000000..7c16b2c98d --- /dev/null +++ b/keyboards/hhkb/keymaps/blakedietz/Makefile @@ -0,0 +1,2 @@ +TAP_DANCE_ENABLE = no +UNICODE_ENABLE = no diff --git a/keyboards/hhkb/keymaps/blakedietz/README.md b/keyboards/hhkb/keymaps/blakedietz/README.md new file mode 100644 index 0000000000..c0f7fde7ad --- /dev/null +++ b/keyboards/hhkb/keymaps/blakedietz/README.md @@ -0,0 +1,134 @@ +# QMK HHKB Keymap: blakedietz + +<!-- TODO: Link to Hasu's geekhack page from his name --> +<!-- TODO: Link to the ergodox ez layout in this repository --> + +This is my (Blake Dietz's) own take on a QMK keymap for the Happy Hacking Keyboard Pro 2 alternate controller made by Hasu. A lot of the + functionality was inspired by the ergodox ez default layout. + +## Dependencies + +### macOS + +```bash +brew tap osx-cross/avr +brew install avr-libc +brew install dfu-programmer +``` + +### Windows/Linux + +[Build Environment Setup](https://github.com/jackhumbert/qmk_firmware/wiki#build-environment-setup) + +## Flashing + +You will need to make sure that you have something that you can use to press the button on the alternate controller in +order to put it into boot mode. + +From the hhkb directory run the following: + +```bash +make clean +make hhkb-blakedietz-dfu +``` + +Press the button on the alternate controller to put the board into boot mode. + +You'll see an output similar to the following: + +```bash +make hhkb-blakedietz-dfu + +Making hhkb with keymap blakedietz and target dfu + +avr-gcc (GCC) 6.2.0 +Copyright (C) 2016 Free Software Foundation, Inc. +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +Size before: + text data bss dec hex filename + 0 22162 0 22162 5692 hhkb_blakedietz.hex + +Compiling: keyboards/hhkb/keymaps/blakedietz/keymap.c [OK] +Compiling: ./tmk_core/common/command.c [OK] +Linking: .build/hhkb_blakedietz.elf [OK] +Creating load file for Flash: .build/hhkb_blakedietz.hex [OK] + +Size after: + text data bss dec hex filename + 0 22162 0 22162 5692 hhkb_blakedietz.hex + +dfu-programmer: no device present. +Error: Bootloader not found. Trying again in 5s. +dfu-programmer: no device present. +Error: Bootloader not found. Trying again in 5s. +Bootloader Version: 0x00 (0) +Erasing flash... Success +Checking memory from 0x0 to 0x6FFF... Empty. +Checking memory from 0x0 to 0x56FF... Empty. +0% 100% Programming 0x5700 bytes... +[>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] Success +0% 100% Reading 0x7000 bytes... +[>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] Success +Validating... Success +0x5700 bytes written into 0x7000 bytes memory (77.68%). +``` + +### Layers + +#### Default + +##### A more "standard" layout + +This layout places tilde in the standard location. Backspace is moved to the two upper-right-most keys and pipe +is put back where it belongs (where backspace is on the default hhkb2 keymapping). + +##### Hyper key + +<!-- TODO: Link to Brett's article about the thyper key --> + +This layout throws out the HHKB's control key in favor of a Hyper key. Ctrl is instead placed on the z and / keys and +can be activated with a long press. I find that this is far more ergonomic as it's less of a reach and it allows you to +alternate to either hand when you need to use `ctrl` as a modifier. + +The hyper key can be held for hyper and tapped for escape. You'll find that this is quite nice for vim. + +Enter is also a hyper key. This allows for symmetry between control and enter. Hold for hyper, tap for enter. + +##### Tap to Hold + +###### CTL, ALT, GUI + +Since the HHKB does not have three super/meta keys, these keys were moved to pinky, ring and middle finger for ctrl, alt/ + option and super respectively. This is closer to home row which I've found causes less strain. + +The Alt and Super keys are instead replaced with layer toggle keys to go to dev and mouse mode respectively. + +###### Space + +Hold space to switch to dev mode. This will put you on a layer to have vim like arrow functionality on h,j,k and l. Use +this in editors that don't have vim keybindings. + +### Dev + +The Dev layer can be activated holding space or hitting the HHKB's Alt key. This will put you in a mode +where all function keys are available and left, right, up and down are mapped to their vim equivalents. The function + keys are mapped in such a way that you can use them for debugging. Typically I map debugging functions in all IDEs to + the following for a seamless debugging experience (e.g. jumping from Intellij to chrome dev tools and back): + + - f1 -> step over + - f2 -> step into + - f3 -> step out + - f4 -> continue + - f5 -> set break point on current line + +### Media + +The media layer can be activated by pressing and holding the semi-colon. I've also placed the play and pause key on the +apostrophe key in the media layer. This allows you to easily roll your pinky from the media toggle (semi-colon) to the +play/pause key in one fluid motion. + +I've also tried to logically map next/previous track along with volume up/down vim behavior. In vim since middle finger +goes up on k and index finger goes down on j, next/prev track is k/j respectively. ,/m changes volume up/down +respectively while toggled to the media layer. diff --git a/keyboards/hhkb/keymaps/blakedietz/config.h b/keyboards/hhkb/keymaps/blakedietz/config.h new file mode 100644 index 0000000000..e0d2bce0f1 --- /dev/null +++ b/keyboards/hhkb/keymaps/blakedietz/config.h @@ -0,0 +1,24 @@ +// Based off of this section: +// https://github.com/qmk/qmk_firmware/blob/master/doc/BUILD_GUIDE.md#the-configh-file +#ifndef CONFIG_BLAKEDIETZ_H +#define CONFIG_BLAKEDIETZ_H + +// Bring in original defaults +#include "../../config.h" + +// Define mousekey settings +#define MOUSEKEY_DELAY 0 +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_MAX_SPEED 2 +#define MOUSEKEY_TIME_TO_MAX 5 +#define MOUSEKEY_WHEEL_DELAY 0 + +// Set up tapdance functionality +//#define TAPPING_TOGGLE 1 +// TAPPING_TERM is set in config.h this defaults to 200 + +// This makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when +// you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.) +#define IGNORE_MOD_TAP_INTERRUPT + +#endif diff --git a/keyboards/hhkb/keymaps/blakedietz/keymap.c b/keyboards/hhkb/keymaps/blakedietz/keymap.c new file mode 100644 index 0000000000..ef29a5c80d --- /dev/null +++ b/keyboards/hhkb/keymaps/blakedietz/keymap.c @@ -0,0 +1,122 @@ +#include "hhkb.h" + +// Layer names +#define BASE 0 +#define DEV 1 +#define MOUSE 2 +#define MEDIA 3 + +// Required for leader function. Measured in ms +// #define LEADER_TIMEOUT 300 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* BASE Level: Default Layer + |-----------+-------+--------+-------+-------+-------+-------+-------+-------+-------+-------+-------+-------+------+----| + | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bksp |Lead| + |-----------+-------+--------+-------+-------+-------+-------+-------+-------+-------+-------+-------+-------+------+----| + | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | | \ | + |-----------+-------+--------+-------+-------+-------+-------+-------+-------+-------+-------+-------+-------+------+----| + | Esc/Hyper | A | S | D | F | G | H | J | K | L |;/Media| ' | Enter | | | + |-----------+-------+--------+-------+-------+-------+-------+-------+-------+-------+-------+-------+-------+------+----| + | Shift | Z/Ctl | X/Alt | C/Gui | V | B | N | M | ,/Gui | ./Alt | //Ctl | Shift | Dev | | | + |-----------+-------+--------+-------+-------+-------+-------+-------+-------+-------+-------+-------+-------+------+----| + TODO: Maybe add a photoshop layer for when I need to hold spacebar down. Maybe just make it a layer that you + |------+------+-----------------------+------+------| + | Dev |Mouse | ******* Space ******* | Dev |Mouse | + |------+------+-----------------------+------+------| + */ + + [BASE] = KEYMAP( // default layer + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_LEAD, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + ALL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(MEDIA, KC_SCLN), KC_QUOT, ALL_T(KC_ENT), \ + KC_LSFT, CTL_T(KC_Z), ALT_T(KC_X), GUI_T(KC_C), KC_V, KC_B, KC_N, KC_M, GUI_T(KC_COMM), ALT_T(KC_DOT), CTL_T(KC_SLSH), KC_RSFT, TG(DEV), \ + TG(DEV), TG(MOUSE), LT(DEV, KC_SPC), TG(MOUSE), TG(DEV)), + + /* Layer DEV: DEV mode (DEV Fn) + TODO: Add a cmd/tab function to the developer layer for quick switching between different applications when debugging + |------+-----+-----+-----+----+----+--------+----------------+--------------+-----------+-------------+-----+-------+-------+-----| + | | | | | | | | | | | | | | | | + |------+-----+-----+-----+----+----+--------+----------------+--------------+-----------+-------------+-----+-------+-------+-----| + | | | | | | | | | | | | | | | | + |------+-----+-----+-----+----+----+--------+----------------+--------------+-----------+-------------+-----+-------+-------+-----| + | | F1 | F2 | F3 | F4 | F5 | Left | Down | Up | Right | | | | | | + |------+-----+-----+-----+----+----+--------+----------------+--------------+-----------+-------------+-----+-------+-------+-----| + | | | | | | | | | | | | | | | | + |------+-----+-----+-----+----+----+--------+----------------+--------------+-----------+-------------+-----+-------+-------+-----| + + |------+------+----------------------+------+------+ + | **** | **** | ******************** | **** | **** | + |------+------+----------------------+------+------+ + */ + + [DEV] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, TG(DEV), \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + /* Layer MOUSE: MOUSE mode (MOUSE Fn) + |------+-----+-----+-----+----+----+--------+----------------+--------------+-----------+-------------+-----+-------+-------+-----| + | | | | | | | | | | | | | | | | + |------+-----+-----+-----+----+----+--------+----------------+--------------+-----------+-------------+-----+-------+-------+-----| + | | | | | | | | | | | | | | | | + |------+-----+-----+-----+----+----+--------+----------------+--------------+-----------+-------------+-----+-------+-------+-----| + | | | | | | | | | | | | | | | | + |------+-----+-----+-----+----+----+--------+----------------+--------------+-----------+-------------+-----+-------+-------+-----| + | | | | | | | | | | | | | | | | + |------+-----+-----+-----+----+----+--------+----------------+--------------+-----------+-------------+-----+-------+-------+-----| + + |------+------+----------------------+------+------+ + | **** | **** | ******************** | **** | **** | + |------+------+----------------------+------+------+ + */ + + [MOUSE] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_D, KC_WH_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, TG(DEV), \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + /* Layer MEDIA: mode (Hold Semi-colon) + |------+-----+-----+-----+----+----+----+----------------+--------------+-----------+-------------+-----+-------+-------+-----| + | | | | | | | | | | | | | | | | + |------+-----+-----+-----+----+----+----+----------------+--------------+-----------+-------------+-----+-------+-------+-----| + | | | | | | | | | | | | | | | | + |------+-----+-----+-----+----+----+----+----------------+--------------+-----------+-------------+-----+-------+-------+-----| + | | | | | | | | Previous | Next | | Play/Pause | | | | | + |------+-----+-----+-----+----+----+----+----------------+--------------+-----------+-------------+-----+-------+-------+-----| + | | | | | | | | Volume Down | Volume Up | Mute | | | | | | + |------+-----+-----+-----+----+----+----+----------------+--------------+-----------+-------------+-----+-------+-------+-----| + + |------+------+----------------------+------+------+ + | **** | **** | ******************** | **** | **** | + |------+------+----------------------+------+------+ + + */ + + [MEDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_MUTE, KC_TRNS, KC_MPLY, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, TG(DEV), \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/hhkb/keymaps/cinaeco/Makefile b/keyboards/hhkb/keymaps/cinaeco/Makefile new file mode 100644 index 0000000000..05b724051e --- /dev/null +++ b/k |