diff options
116 files changed, 6199 insertions, 1230 deletions
diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 8d1efb12a2..ec12189545 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -10,39 +10,45 @@ If you want to use single color LED's you should use the [LED Matrix Subsystem]( There is basic support for addressable RGB matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`: - RGB_MATRIX_ENABLE = IS31FL3731 +```C +RGB_MATRIX_ENABLE = IS31FL3731 +``` Configure the hardware via your `config.h`: - // This is a 7-bit address, that gets left-shifted and bit 0 - // set to 0 for write, 1 for read (as per I2C protocol) - // The address will vary depending on your wiring: - // 0b1110100 AD <-> GND - // 0b1110111 AD <-> VCC - // 0b1110101 AD <-> SCL - // 0b1110110 AD <-> SDA - #define DRIVER_ADDR_1 0b1110100 - #define DRIVER_ADDR_2 0b1110110 - - #define DRIVER_COUNT 2 - #define DRIVER_1_LED_TOTAL 25 - #define DRIVER_2_LED_TOTAL 24 - #define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL +```C +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 0b1110100 AD <-> GND +// 0b1110111 AD <-> VCC +// 0b1110101 AD <-> SCL +// 0b1110110 AD <-> SDA +#define DRIVER_ADDR_1 0b1110100 +#define DRIVER_ADDR_2 0b1110110 + +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 25 +#define DRIVER_2_LED_TOTAL 24 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL +`` |