Merge branch 'master' of github.com:krebscode/painload

2 files changed, 46 insertions, 0 deletions

diff --git a/oncology/dpfhack_display/include/flash.h b/oncology/dpfhack_display/include/flash.h
new file mode 100644
index 00000000..f753bd59
--- /dev/null
+++ b/oncology/dpfhack_display/include/flash.h
@@ -0,0 +1,19 @@
+// SPI STM flash commands:
+// stolen from BFloader
+
+#define SPM_RDID              0x9f    // Read ID
+#define SPM_WREN              0x06    // Write enable
+#define SPM_WRDI              0x04    // Write disable
+#define SPM_RDSR              0x05    // Read status register
+#define SPM_WRSR              0x01    // Write status register
+#define SPM_READ              0x03    // Read data bytes
+#define SPM_PP                0x02    // Page program
+#define SPM_DP                0xb9    // Deep power down
+#define SPM_RES               0xab    // Release from deep power down
+                                      // and read signature
+#define SPM_FLASH_SE          0xd8    // Sector erase
+#define SPM_FLASH_BE          0xc7    // Bulk erase
+#define SPM_FLASH_FAST_READ   0x0B    // Read data bytes fast
+
+#define SPM_SR_SRWD           0x80    // SR write protection (HW)
+
diff --git a/oncology/dpfhack_display/include/usbuser.h b/oncology/dpfhack_display/include/usbuser.h
new file mode 100644
index 00000000..618fb601
--- /dev/null
+++ b/oncology/dpfhack_display/include/usbuser.h
@@ -0,0 +1,27 @@
+/* USB user commands
+ *
+ * Only temporary. Should move to dpflib or into a dclib configuration.
+ *
+ */
+
+#define PROTOCOL_VERSION  1
+
+/** Our vendor specific USB commands to do stuff on the DPF */
+
+#define USBCMD_GETPROPERTY  0x00    ///< Get property
+#define USBCMD_SETPROPERTY  0x01    ///< Set property
+#define USBCMD_MEMREAD      0x04    ///< Memory read
+#define USBCMD_APPLOAD      0x05    ///< Load and run applet
+// #define USBCMD_CLRFB        0x10    ///< Clear screen with RGB565 color
+#define USBCMD_WRITEFB      0x11    ///< Write full screen. DEPRECATED.
+#define USBCMD_BLIT         0x12    ///< Blit to screen
+#define USBCMD_FLASHLOCK    0x20    ///< Lock USB for flash access
+#define USBCMD_PROBE        0xff    ///< Get version code (probe)
+
+/* Some special return codes */
+#define USB_IN_SEQUENCE     0x7f    ///< We're inside a command sequence
+
+// Property handling:
+
+#define PROPERTY_BRIGHTNESS  0x01
+#define PROPERTY_ORIENTATION 0x10