Merge branch 'master' of github.com:krebscode/painload

19 files changed, 1232 insertions, 5 deletions

diff --git a/god/claws/.gitignore b/god/claws/.gitignore
new file mode 100644
index 00000000..5da5924f
--- /dev/null
+++ b/god/claws/.gitignore
@@ -0,0 +1 @@
+rcontrol
diff --git a/god/claws/Makefile b/god/claws/Makefile
new file mode 100644
index 00000000..abfae5eb
--- /dev/null
+++ b/god/claws/Makefile
@@ -0,0 +1,18 @@
+# Makefile for the rcontrol program
+# We set a setuid bit as this tools needs root privilleges to open the FT232 device.
+
+BINARY=./rcontrol
+
+install: all
+	ln -snf $$PWD/$(BINARY) ../bin/
+
+all:$(BINARY)
+	chown root.root $(BINARY)
+	chmod +s $(BINARY)
+
+$(BINARY): rcontrol.c
+	#punani install libftdi1 libftdi-dev
+	gcc -Wall -lusb -lftdi rcontrol.c -o $(BINARY)
+
+clean:
+	rm -f $(BINARY)
diff --git a/god/claws/README.md b/god/claws/README.md
new file mode 100644
index 00000000..00c90a85
--- /dev/null
+++ b/god/claws/README.md
@@ -0,0 +1,12 @@
+# CLAWS
+
+Claws is a tool to manage some obscure Hardware Relay Board currently attached
+to the krebs infrastructure
+
+# Installation
+
+    make install
+
+# Usage
+
+    rcontrol --help
diff --git a/god/claws/communication.h b/god/claws/communication.h
new file mode 100644
index 00000000..db4b2c36
--- /dev/null
+++ b/god/claws/communication.h
@@ -0,0 +1,25 @@
+/* These are the command codes of the relay card. If you change something here you must
+ * recompile the firmware and the control tool. */
+#ifndef _COMMUNICATION_H
+#define _COMMUNICATION_H
+
+#define COMMAND_RELAY_ON           0x01
+#define COMMAND_RELAY_OFF          0x02
+#define COMMAND_RELAY_TOGGLE       0x04
+#define COMMAND_RELAY_SET          0x08
+#define COMMAND_RELAY_TIME_ON      0x10
+#define COMMAND_RELAY_TIME_OFF     0x20
+#define COMMAND_RELAY_TIME_CYCLIC  0x40
+#define COMMAND_GET_STATUS         0x80
+#define COMMAND_DEL_TIMERS         0x81
+#define COMMAND_SETUP_REMOTE       0x82
+
+
+#define RESPONSE_OK                 0xff
+#define RESPONSE_INVALID_COMMAND    0xfe
+#define RESPONSE_INVALID_ARGUMENT   0xfd
+#define RESPONSE_TRANSMISSION_ERROR 0xfc
+
+#define COMMANDO_LENGTH    4
+
+#endif
diff --git a/god/claws/rcontrol.c b/god/claws/rcontrol.c
new file mode 100644
index 00000000..972c97d0
--- /dev/null
+++ b/god/claws/rcontrol.c
@@ -0,0 +1,479 @@
+/*  +----------------------------------------------------------------------+
+ *  | relay control program                                                |
+ *  |   by mgr, 2007                                                       |
+ *  |   last change: 2009-01-05                                            |
+ *  |                                                                      |
+ *  | This program is used to control the relay card version 1.0. For more |
+ *  | information have a look at the project homepage.                     |
+ *  | You will need libftdi in order to compile this tool.                 |
+ *  |                                                                      |
+ *  | NOTE: For some reason the -l option causes a program crash if I      |
+ *  | compile this program with -O2. On top of that this code seems to     |
+ *  | be quite optimal, the program size gets a little larger with -O2,    |
+ *  | so I suggest you just compile it without optimization.               |
+ *  +----------------------------------------------------------------------+
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <string.h>
+#include <getopt.h>
+#include <ctype.h>
+#include <time.h>
+#include <ftdi.h>       // libftdi
+
+/* Notice that if you experiment with the baud rate, you will have to adapt
+ * the firmware, too. Also I do not recommend it, as 9600 Bauds are completely
+ * sufficient for this application. */
+#define BAUD 9600
+
+/* If you are using more than one FT232-based pieces of hardware at once, 
+ * we need a way to uniquely address any given one. This is done by the
+ * serial of the specific device which you can pass to this tool or specify
+ * here. If no serial is specified (NULL), the first found device is opened. */
+#define DEFAULT_FT_SERIAL   "A6TMRSS6"
+
+#define VERSION             "1.0"
+
+#define OPTION_ADDRESS      0x01
+#define OPTION_INTERVAL     0x04
+#define OPTION_CYCLIC       0x08
+#define OPTION_ON           0x10
+#define OPTION_OFF          0x20
+#define OPTION_TOGGLE       0x40
+#define OPTION_DEL_TIMERS   0x80
+#define OPTION_LIST_DEVICES 0x200
+
+#define EXIT_CODE_OK        0
+#define EXIT_CODE_FAILURE   1
+
+#include "communication.h"
+
+/* function prototypes */
+void usage(char* name);
+void version(void);
+const char* card_strerror(int error);
+int valid_argument(const char* str);
+void exit_gracefully(struct ftdi_context* ftdic, char exit_code);
+
+
+int main(int argc, char **argv)
+{
+  int ret=0, int_argument=0, option_flags=0, long_index=0, i=0, num_ops=0;
+  char c=0;
+  unsigned char buf[COMMANDO_LENGTH], char_argument=0, operation=0;
+  const char* ft_serial=DEFAULT_FT_SERIAL;
+  double double_argument;
+  char buf0[64], buf1[64], buf2[64];
+  time_t start_time;
+
+  //struct ftdi_eeprom eeprom;
+
+  struct ftdi_context ftdic;
+  struct ftdi_device_list *devlist=NULL, *curdev=NULL;
+
+  static struct option long_options[] =
+  {
+     {"help",          0, 0, '?'},
+     {"version",       0, 0, 'V'},
+     {"on",            1, 0, 'o'},
+     {"off",           1, 0, 'f'},
+     {"toggle",        1, 0, 't'},
+     {"set",           1, 0, 's'},
+     {"status",        0, 0, 'S'},
+     {"interval",      1, 0, 'v'},
+     {"cyclic",        0, 0, 'c'},
+     {"address",       1, 0, 'a'},
+     {"delete-timers", 0, 0, 'd'},
+     {"list-devices",  0, 0, 'l'},
+     {0,               0, 0,  0 }
+  };
+  
+  /* fetch the command line options */
+  while ((c = getopt_long_only(argc, argv, "?Vo:f:t:s:Sv:ca:dl", long_options,
+	                       &long_index)) != -1)
+  {
+    switch (c)
+    {
+      case 'o': case 'f': case 't':
+	int_argument = atoi(optarg);
+
+	if (int_argument > 6 || int_argument < 1 || !valid_argument(optarg))
+	{
+	  fprintf(stderr, "%s: -s: invalid value `%s' (1-6 is valid)\n",
+			  *argv, optarg);
+	  return EXIT_CODE_FAILURE;
+	}
+
+	char_argument = (unsigned char)int_argument;
+
+	if (c == 't')
+	{
+	  operation = COMMAND_RELAY_TOGGLE;
+	  option_flags |= OPTION_TOGGLE;
+	} else if (c == 'o')
+	{
+	  operation = COMMAND_RELAY_ON;
+	  option_flags |= OPTION_ON;
+	} else
+	{
+	  operation = COMMAND_RELAY_OFF;
+          option_flags |= OPTION_OFF;
+        }
+        
+	num_ops++;
+
+	break;
+      
+      case 's':
+        int_argument = atoi(optarg);
+
+	if (int_argument > (1 << 6)-1 || int_argument < 0 || !valid_argument(optarg))
+	{
+	  fprintf(stderr, "%s: -s: invalid value `%s'\n", *argv, optarg);
+	  return EXIT_CODE_FAILURE;
+	}
+
+	char_argument = (unsigned char)int_argument;
+	operation = COMMAND_RELAY_SET;
+	num_ops++;
+	break;
+      
+      case 'S':
+	operation = COMMAND_GET_STATUS;
+        num_ops++;
+	break;
+      
+      case 'v':
+	double_argument = atof(optarg);
+        int_argument = (int)(double_argument*60) /10;
+	
+	if (int_argument < 1 || int_argument > (1 << 16)-1)
+	{
+          fprintf(stderr, "%s: -i: invalid interval `%s'\n", *argv, optarg);
+	  return EXIT_CODE_FAILURE;
+	}
+
+        option_flags |= OPTION_INTERVAL;
+	break;
+      
+      case 'c':
+        option_flags |= OPTION_CYCLIC;
+	break;  
+      
+      case 'd':
+        operation = COMMAND_DEL_TIMERS;
+	option_flags |= OPTION_DEL_TIMERS;
+        num_ops++;
+	break;	
+      
+      case 'a':
+	if (strlen(optarg) != 8)
+	{
+	  fprintf(stderr, "%s: -s: invalid serial number `%s'\n", *argv, optarg);
+	  return EXIT_CODE_FAILURE;
+	}
+
+        ft_serial = optarg;
+	option_flags |= OPTION_ADDRESS;
+	break;
+      
+      case 'l':
+	option_flags |= OPTION_LIST_DEVICES;
+	break;
+
+      case 'V':
+	version();
+	break;
+      case '?': default:
+        usage(*argv);
+	break;
+    }
+  }
+  
+  /* check whether the command line options are valid */
+  if ((option_flags & OPTION_INTERVAL))
+  {
+    if (option_flags & OPTION_DEL_TIMERS)
+    {
+      fprintf(stderr, "%s: -d cannot be mixed with timing options\n", *argv);
+      usage(*argv);
+    }
+
+    if (option_flags & OPTION_CYCLIC)
+    {
+      operation = COMMAND_RELAY_TIME_CYCLIC; 
+    } else if (option_flags & OPTION_ON)
+    {
+      operation = COMMAND_RELAY_TIME_ON;
+    } else if (option_flags & OPTION_OFF)
+    {
+      operation = COMMAND_RELAY_TIME_OFF;
+    } else 
+    {
+      fprintf(stderr, "%s: -v: you must also specify an operation (-o or -f)\n", *argv);
+      usage(*argv);
+    }
+  }
+
+  if (!operation && !(option_flags & OPTION_LIST_DEVICES))
+  {
+    usage(*argv);
+  }
+
+  if (((option_flags & OPTION_DEL_TIMERS) && (operation != COMMAND_DEL_TIMERS)))
+  {
+    fprintf(stderr, "%s: invalid mixture of options\n", *argv);
+    usage(*argv);
+  }
+  
+  if (num_ops > 1)
+  {
+    fprintf(stderr, "%s: more than one operation specified\n", *argv);
+    usage(*argv);
+  }
+
+  if (ftdi_init(&ftdic) < 0)
+  {
+      fprintf(stderr, "%s: unable to initialize FTDI context: %d (%s)\n", *argv, ret, 
+		      ftdi_get_error_string(&ftdic));
+      return EXIT_CODE_FAILURE;
+  }
+  
+  /* list all found FT232 devices */
+  if (option_flags & OPTION_LIST_DEVICES)
+  {
+    printf("scanning for FT232 devices...\n"
+	   "you can address the devices using `%s -a <serial>'\n", *argv);
+
+    if ((ret = ftdi_usb_find_all(&ftdic, &devlist, 0x0403, 0x6001)) < 0)
+    {
+       fprintf(stderr, "%s: unable to scan devices: %d (%s)\n", *argv, ret, 
+		      ftdi_get_error_string(&ftdic));
+       exit(EXIT_CODE_FAILURE);
+    }
+    
+    if (ret == 0)
+    {
+      printf("  no devices found :(\n");
+      return EXIT_CODE_OK;
+    }
+    
+    for (i=0, curdev = devlist; curdev != NULL; i++)
+    {
+      if (ftdi_usb_get_strings(&ftdic, curdev->dev, buf0, sizeof(buf0)/sizeof(char),
+			       buf1, sizeof(buf1)/sizeof(char), buf2, sizeof(buf2)/sizeof(char)) < 0)
+      {
+        fprintf(stderr, "unable to fetch information for device #%i: %s\n", i,
+			ftdi_get_error_string(&ftdic));
+        // continue caused an endless loop in case of an error
+	break;
+      }
+
+      printf("\ndevice #%i%s:\n"
+	     "  manufacturer: %s\n"
+	     "  device:       %s\n"
+	     "  serial:       %s\n", i, (i == 0 ? " (default)" : ""), 
+	     (buf0 != NULL ? buf0 : "n/a"), (buf1 != NULL ? buf1 : "n/a"),
+	     (buf2 != NULL ? buf2 : "n/a"));
+      
+      curdev = curdev->next;
+    }
+   
+    ftdi_list_free(&devlist);
+    return EXIT_CODE_OK;
+  }
+
+  /* Try to open the specified device. If that fails, we take a long shot
+   * and open the first found FT232 device and assume its the relay card.
+   * We don't do this if an address was specified with the -a option. */
+  if ((ret = ftdi_usb_open_desc(&ftdic, 0x0403, 0x6001, NULL, ft_serial)) < 0)
+  {
+    fprintf(stderr, "%s: unable to open ftdi device: %d (%s)\n", *argv, ret, 
+		    ftdi_get_error_string(&ftdic));
+    exit(EXIT_CODE_FAILURE);
+  }
+  
+  /* get rid of any data still floating around the buffer */
+  ftdi_usb_reset(&ftdic);
+  ftdi_usb_purge_buffers(&ftdic);
+
+
+  if ((ret = ftdi_set_baudrate(&ftdic, BAUD)) < 0)
+  {
+    fprintf(stderr, "%s: unable to set baudrate: %d (%s)\n", *argv, ret, 
+		    ftdi_get_error_string(&ftdic));
+    exit_gracefully(&ftdic, EXIT_CODE_FAILURE);
+  }
+  
+  if ((ret = ftdi_set_line_property(&ftdic, 8, 2, NONE)) < 0)
+  {
+    fprintf(stderr, "%s: unable to set line property: %d (%s)\n", *argv, ret,
+		    ftdi_get_error_string(&ftdic));
+    exit_gracefully(&ftdic, EXIT_CODE_FAILURE);
+  }
+ 
+  if ((ret = ftdi_setflowctrl(&ftdic, SIO_RTS_CTS_HS)) < 0) {
+    fprintf(stderr, "%s: unable to setup flow control: %d (%s)\n", *argv, ret,
+		    ftdi_get_error_string(&ftdic));
+    exit_gracefully(&ftdic, EXIT_CODE_FAILURE);
+  }
+
+  /*if ((ret = ftdi_set_latency_timer(&ftdic, 10)) < 0)
+  {
+    fprintf(stderr, "%s: unable to set latency timer: %d (%s)\n", *argv, ret,
+		    ftdi_get_error_string(&ftdic));
+    exit_gracefully(&ftdic, EXIT_CODE_FAILURE);
+  }*/
+ 
+  buf[0] = operation;
+  buf[2] = 0; buf[3] = 0; buf[4] = 0;
+
+  switch (operation)
+  {
+    case COMMAND_RELAY_SET:
+      buf[1] = char_argument;
+      break;
+    
+    case COMMAND_RELAY_ON: case COMMAND_RELAY_OFF:
+    case COMMAND_RELAY_TOGGLE:
+      buf[1] = (1 << (char_argument-1));
+      break;
+    
+    case COMMAND_RELAY_TIME_ON:
+    case COMMAND_RELAY_TIME_OFF:
+    case COMMAND_RELAY_TIME_CYCLIC:
+      buf[1] = char_argument-1;
+      buf[2] = (int_argument & 0xff); // low byte
+      buf[3] = (int_argument >> 8);   // high byte
+      break;
+
+    default:
+      break;
+  }
+  
+  /* These values might not make much sense are vital to the correct
+   * funtion of this program, so better don't touch them. */
+  ftdi_write_data_set_chunksize(&ftdic, 1);
+  ftdi_read_data_set_chunksize(&ftdic,  4);
+  
+  /* send the command */
+  if (ftdi_write_data(&ftdic, buf, COMMANDO_LENGTH) != COMMANDO_LENGTH)
+  {
+    fprintf(stderr, "%s: unable to send command: %s\n", *argv, 
+		    ftdi_get_error_string(&ftdic));
+    exit_gracefully(&ftdic, EXIT_CODE_FAILURE);
+  }
+ 
+  /* Read the card's response. */
+  start_time = time(NULL); 
+  while ((ret = ftdi_read_data(&ftdic, buf, 1)) == 0) {
+    usleep(500);
+    if (time(NULL)-start_time >= 2) {
+      fprintf(stderr, "%s: unable to read card response, the operation might have "
+      		      "failed\n", *argv);
+      exit_gracefully(&ftdic, EXIT_FAILURE);
+    }
+  }
+  
+  if (operation == COMMAND_GET_STATUS && buf[0] <= ((1 << 7)-1))
+  {
+     printf("relay status: %i (0b%s%s%s%s%s%s)\n", buf[0],
+            (buf[0] & (1 << 5)) ? "1" : "0", 
+	    (buf[0] & (1 << 4)) ? "1" : "0",
+	    (buf[0] & (1 << 3)) ? "1" : "0",
+            (buf[0] & (1 << 2)) ? "1" : "0",
+	    (buf[0] & (1 << 1)) ? "1" : "0",
+	    (buf[0] & (1 << 0)) ? "1" : "0");
+     exit_gracefully(&ftdic, EXIT_CODE_OK);
+  }
+
+  if (buf[0] != RESPONSE_OK)
+  {
+    fprintf(stderr, "%s: relay card returned: %s\n", *argv, card_strerror(buf[0]));
+    exit_gracefully(&ftdic, EXIT_FAILURE);
+  }
+  
+  /* we can exit now */
+  exit_gracefully(&ftdic, EXIT_CODE_OK);
+  return 0; // to make the compiler happy
+}
+
+void exit_gracefully(struct ftdi_context* ftdic, char exit_code)
+{
+  ftdi_usb_purge_buffers(ftdic);
+  ftdi_usb_close(ftdic); 
+  ftdi_deinit(ftdic);
+  
+  exit(exit_code);
+}
+
+int valid_argument(const char* str)
+{
+  int i;
+
+  for (i=0; i<strlen(str); i++)
+  {
+    if (!isdigit(str[i]) && (str[i] != '.'))
+      return 0;
+  }
+
+  return 1;
+}
+
+const char* card_strerror(int error)
+{
+  const char* message = "no error";
+  
+  switch (error)
+  {
+    case RESPONSE_OK:
+      message = "all fine";
+      break;
+    case RESPONSE_INVALID_COMMAND:
+      message = "invalid command";
+      break;
+    case RESPONSE_INVALID_ARGUMENT:
+      message = "invalid command argument";
+      break;
+    case RESPONSE_TRANSMISSION_ERROR:
+      message = "transmission error";
+      break;
+  }
+
+  return message;
+}
+
+void usage(char *name)
+{
+  printf("\nrelay control program usage ==================================================\n"
+	 "  -?/--help .............. dump this screen\n"
+	 "  -V/--version ........... echo some program information\n"
+	 "  -o/--on <num>: ......... switch relay <num> on\n"
+	 "  -f/--off <num>: ........ switch relay <num> off \n"
+	 "  -t/--toggle <num>: ..... toggle relay <num> \n"
+	 "  -s/--set <mask>: ....... set the status of all relays to <mask>\n"
+	 "  -S/--status: ........... get the current relay status\n"
+	 "  -v/--interval <units> .. specify a timing interval (in minutes)\n"
+	 "  -c/--cyclic: ........... makes a timing operation (-v) cyclic\n"
+         "  -a/--address <serial> .. addresses a specific card if multiple are installed\n"
+	 "  -d/--delete-timers ..... deletes all active timers\n"
+	 "  -l/--list-devices ...... lists all found FT232 devices\n\n");
+  exit(0);
+}
+
+void version(void)
+{
+  printf("\nThis is the relay control program version %s ($Revision: 26 $)\n"
+	 "----------------------------------------------------------------\n"
+	 "  written by Michael Gross, 2007\n"
+	 "  binary compiled: %s %s\n\n"
+	 "This program can be redistributed under the terms of the GNU GPL version 2\n"
+	 "or later. For more information about this software and the hardware, visit\n"
+	 "my homepage at http://www.coremelt.net. As usual with free software, there\n"
+	 "is ABSOLUTELY NO WARRANTY. For details, refer to the GPL.\n\n", VERSION, 
+	 __DATE__, __TIME__);
+  
+  exit(0);
+}
diff --git a/god/streams/.gitignore b/god/streams/.gitignore
new file mode 100644
index 00000000..0d20b648
--- /dev/null
+++ b/god/streams/.gitignore
@@ -0,0 +1 @@
+*.pyc
diff --git a/god/streams/Makefile b/god/streams/Makefile
new file mode 100644
index 00000000..2d0056f4
--- /dev/null
+++ b/god/streams/Makefile
@@ -0,0 +1,16 @@
+INITD = $(shell test -e /etc/rc.d/ && echo /etc/rc.d/ || echo /etc/init.d/)
+streams = $(shell cut -d\  -f2 stream.db)
+
+
+CURRDIR = ${PWD}
+.PHONY: all $(streams)
+local: ../../bin/streams
+
+../../bin/streams:
+	ln -sf $$PWD/bin/streams ../../bin/streams
+all: $(streams)
+	@update-rc.d groove defaults 2>/dev/null || echo "** put groove daemon in DAEMONS in /etc/rc.conf"
+
+$(streams): local
+	@test -L $(INITD)$@ || test ! -e $(INITD)$@ && \
+	ln -n -s -f $$PWD/stream-starter $(INITD)$@ && echo "writing $@ to $(INITD)"
diff --git a/god/streams/README.md b/god/streams/README.md
new file mode 100644
index 00000000..cc763ede
--- /dev/null
+++ b/god/streams/README.md
@@ -0,0 +1,38 @@
+# streams done right(tm)
+
+There are numerous ways to start streams ( make your computer or some server 
+output streamed audio). Currently implemented are:
+
+# Streams Modules
+1. pure streams  - will start mpd on your local machine
+2. mpdstreams    - will use a given mpd server to start a stream
+3. relaxxstreams - will contact the relaxxplayer (mpd front-end) if the direct 
+                   connection to the mpd is prohibited by firewall rules
+# Database
+Currently there are a number of possible streams saved in the database files
+which contain of a link, a space, and the name of the stream. the database 
+can be found in db/ .
+
+Currently there are two kinds of databases:
+1. streams.db - contains links to playlists of streams
+2. direct.db  - contains links directly to the stream, not the playlist
+
+to generate direct.db from a list of playlists use the helper/* scripts
+
+# initscripts
+
+the most convenient way to start streams is to use stream-starter which is 
+a script which, when symlinked with a name of a stream, invokes the streams
+tool with its own name as parameter.
+
+An example:
+
+    ln -s /krebs/god/streams/bin/stream-starter /etc/init.d/groove
+    /etc/init.d/groove start
+
+# Remarks
+deepmix,groovesalad and radiotux are now init.d scrips which can be
+started and stopped.
+
+scripts are dumped into /etc/init.d and groovesalad will be set as
+default via update-rc.d
diff --git a/god/streams/bin/helper/streamfind b/god/streams/bin/helper/streamfind
new file mode 100644
index 00000000..32b84a4e
--- /dev/null
+++ b/god/streams/bin/helper/streamfind
@@ -0,0 +1,10 @@
+#!/bin/sh
+cat stream.db | while read url name;do
+    curl $url --max-time 1 2>/dev/null| sed -n 's/[fF]ile[0-9]=\(.*\)/\1/p' > "streamfinder/$name"
+    if [ "x`cat \"streamfinder/$name\"`" == "x" ];then
+        rm "streamfinder/$name"
+        echo "$name empty or not a stream"
+    else
+        echo "wrote $name"
+    fi
+done
diff --git a/god/streams/bin/helper/streamwrite b/god/streams/bin/helper/streamwrite
new file mode 100644
index 00000000..a10fb155
--- /dev/null
+++ b/god/streams/bin/helper/streamwrite
@@ -0,0 +1,6 @@
+for i in `ls -1 streamfinder/`;
+do
+    for j in `cat "$i"`;do
+        echo "$j $i" >> direct.db
+    done
+done
diff --git a/god/streams/bin/mpdstreams b/god/streams/bin/mpdstreams
new file mode 100755
index 00000000..a2a5f77c
--- /dev/null
+++ b/god/streams/bin/mpdstreams
@@ -0,0 +1,113 @@
+#!/usr/bin/python2
+
+# this version cannot tell if a stream is running or just ordinary music
+import os
+import sys
+from subprocess import Popen, PIPE
+
+os.chdir(os.path.dirname(os.path.realpath(sys.argv[0])))
+pidfile = "/tmp/krebs.stream.pid"
+host="lounge.mpd.shack"
+url_file = os.environ.get("STREAM_DB", "../db/stream.db")
+urls = []
+for line in open(url_file):
+    urls.append(line.split())
+#print urls
+mybin = sys.argv[0]
+cmd = sys.argv[1] if len(sys.argv) > 1 else "you-are-made-of-stupid"
+stream = sys.argv[2] if len(sys.argv) == 3 else "groove"
+pipe_silent = open("/dev/null","w")
+
+def urlForStream(stream):
+    for url, s in urls:
+        if s == stream:
+            return url
+
+def streamForUrl(url):
+    for u, s in urls:
+        if u == url:
+            return stream 
+
+def startStream(stream_url):
+    Popen(["mpc","--host",host,"crossfade","5"],
+            stdout=pipe_silent,stderr=pipe_silent)
+    Popen(["mpc","--host",host,"repeat","yes"],
+            stdout=pipe_silent,stderr=pipe_silent)
+    Popen(["mpc","--host",host,"clear"],
+            stdout=pipe_silent,stderr=pipe_silent)
+    Popen(["mpc","--host",host,"add",stream_url],
+            stdout=pipe_silent,stderr=pipe_silent).wait()
+    Popen(["mpc","--host",host,"play"],
+            stdout=pipe_silent,stderr=pipe_silent)
+
+def start(stream):
+    ret = running()
+    if ret:
+        print "!! Stream `%s` already running !" % \
+                (ret)
+    else:
+        startStream(urlForStream(stream))
+        print "** Starting `%s`."% stream
+
+
+def stop():
+    ret = running()
+    if not ret:
+        print "!! No Stream running!"
+    else:
+        print "** Stopping `%s`" % ret
+        Popen(["mpc","--host",host,"stop"],
+            stdout=pipe_silent,stderr=pipe_silent)
+        
+
+def running():
+    try:
+        (out,err) = Popen(["mpc","--host",host,"current"],stdout=PIPE,stderr=PIPE).communicate()
+        out = out.rstrip()
+        return out
+    except Exception as e:
+        return ""
+
+
+def slist():
+    for url, name in urls:
+        print "%s : %s" % (name, url)
+
+
+def shorthelp():
+    print "start|stop|restart|status|list [audio stream]"
+
+
+def longhelp():
+    print "Usage: %s" % mybin,
+    shorthelp
+    print """ get all available streams with '/%(fil)s list'
+    Examples:
+    %(fil)s list
+    %(fil)s start groove
+    %(fil)s switch deepmix
+    %(fil)s status
+    %(fil)s stop""" % {'fil': mybin}
+
+if cmd == "start":
+    start(stream)
+elif cmd == "stop":
+    stop()
+elif cmd == "switch" or cmd == "restart":
+    stop()
+    start(stream)
+elif cmd == "status":
+    ret = running()
+    if not ret:
+        print "** nothing running"  # , e
+    else:
+        print "Now Playing: %s" % ret
+elif cmd == "list":
+    slist()
+elif cmd == "--help":
+    longhelp()
+elif cmd == "-h":
+    shorthelp()
+else:
+    print "unknown command `%s`" % cmd
+    print "try `%s` --help" % os.path.basename(mybin)
diff --git a/god/streams/bin/relaxxapi.py b/god/streams/bin/relaxxapi.py
new file mode 100755
index 00000000..f367caef
--- /dev/null
+++ b/god/streams/bin/relaxxapi.py
@@ -0,0 +1,140 @@
+#!/usr/bin/python2
+import json
+from urllib import quote
+class relaxx:
+
+    def __init__(self,relaxxurl="http://lounge.mpd.shack/"):
+        self.baseurl=relaxxurl
+        import requests
+        ret = requests.get(relaxxurl) # grab cookie
+        try:
+            self.r = requests.session(cookies=ret.cookies,headers={"Referer":relaxxurl})
+        except:
+            print ("you are missing the `requests` dependency, please do a `pip install requests`")
+    def _status(self,value=0,data="json=null"):
+        """
+        value is some weird current playlist value, 0 seems to work
+        data is url encoded kv-store
+        """
+        # TODO get the current playlist value
+        url=self.baseurl+"include/controller-ping.php?value=%s"%value
+        return self.r.post(url,data="json=null").text
+
+    def _playlist(self,action,value="",json="null",method="get"):
+        """
+        This function is the interface to the controller-playlist api
+            use it if you dare
+        Possible actions:
+            clear
+            addSong url_encoded_path
+            moveSong 1:2
+            getPlaylists
+            getPlaylistInfo 1
+            listPlaylistInfo
+        as everything seems to be a get request, the method is set to GET as
+        default
+        """
+        url=self.baseurl+"include/controller-playlist.php?action=%s&value=%s&json=%s"%(action,value,json)
+        if method== "get":
+            return self.r.get(url).text
+        elif method == "post":
+            return r.post(url).text
+        else:
+            raise Exception("unknown method %s")
+
+    def _playback(self,action,value="",json="null",method="get"):
+        """
+        play
+        continue
+        stop
+        setCrossfade
+        """
+        url=self.baseurl+"include/controller-playback.php?action=%s&value=%s&json=%s"%(action,value,json)
+        # probably obsolete because everything is "get"
+        if method== "get":
+            return self.r.get(url).text
+        elif method == "post":
+            return r.post(url).text
+        else:
+            raise Exception("unknown method %s")
+
+    def _radio(self,playlist=""):
+        """
+        both, post and get the url seem to work here...
+        """
+        url=self.baseurl+"include/controller-netradio.php?playlist=%s"%quote(playlist)
+        return self.r.get(url).text
+
+    def add_radio(self,playlist=""):
+        print playlist
+        print self._radio(playlist)
+        print json.loads(self._radio(playlist)) #[1:-1])["url"]
+        resolved_url= json.loads(self._radio(playlist)[1:-1])["url"]
+        self.add_song(resolved_url)
+
+    def add_song(self,path):
+        return self._playlist("addSong",path)
+
+    def get_first(self):
+        return json.loads(self._playlist("getPlaylistInfo","0",""))[0]
+
+    def get_first(self):
+        return json.loads(self._playlist("getPlaylistInfo","0",""))[-1]
+
+    def clear(self):
+        return self._playlist("clear")
+    
+    def crossfade(self,ident="0"):
+        """
+        default: no crossfade
+        """
+        return self._playback("setCrossfade",ident)
+
+    def repeat(self,ident="1"):
+        """
+        default: do repeat
+        """
+        return self._playback("repeat",ident)
+
+    def play(self,ident):
+        return self._playback("play",ident)
+
+    def stop(self):
+        return self._playback("stop")
+
+    def cont(self,ident):
+        return self._playback("continue",ident)
+
+    def play_first(self):
+        return self.play(self.get_first()["Id"])
+
+    def play_last(self):
+        return self.play(self.get_last()["Id"])
+
+    def state(self):
+        return json.loads(self._status())
+
+    def is_running(self):
+        return self.state()["status"]["state"] == "play"
+
+    def playing(self):
+        """ returns "" if not running
+        """
+        state = self.state()
+        if state["status"]["state"] == "play" :
+            ident = state["status"]["song"]
+            current = state["playlist"]["file"][int(ident)]
+            return current.get("Name",current.get("Artist")) + " - " + current["Title"]
+        else:
+            return ""
+
+if __name__ == "__main__":
+    r = relaxx()
+    print r.state()
+    print r.playing()
+    print r.add_radio("http://deluxetelevision.com/livestreams/radio/DELUXE_RADIO.pls")
+    #print r.clear()
+    #print r.add_radio("http://somafm.com/lush.pls")
+    #print r.get_first()["Id"]
+    #print r.play_first()
+    #print r.add_radio("http://somafm.com/lush.pls")
diff --git a/god/streams/bin/relaxxstreams b/god/streams/bin/relaxxstreams
new file mode 100755
index 00000000..0d3813a7
--- /dev/null
+++ b/god/streams/bin/relaxxstreams
@@ -0,0 +1,107 @@
+#!/usr/bin/python2
+
+# this version cannot tell if a stream is running or just ordinary music
+import os
+import sys
+import json
+from urllib import quote
+from relaxxapi import relaxx 
+
+try:
+    import requests
+except:
+    print ("you are missing the `requests` dependency, please do a `pip install requests`")
+from subprocess import Popen, PIPE
+
+os.chdir(os.path.dirname(os.path.realpath(sys.argv[0])))
+pidfile = "/tmp/krebs.stream.pid"
+baseurl="http://lounge.mpd.shack/"
+url=baseurl+"include/controller-playlist.php?action=%s&value=%s&json=%s"
+url_