bridge -> Cancer/\1

10 files changed, 0 insertions, 280 deletions

diff --git a/bridge/README.md b/bridge/README.md
deleted file mode 120000
index 7c994fe2..00000000
--- a/bridge/README.md
+++ /dev/null
@@ -1 +0,0 @@
-share/doc/bridge/README.md
\ No newline at end of file
diff --git a/bridge/bin/bridge b/bridge/bin/bridge
deleted file mode 100755
index 33cf4577..00000000
--- a/bridge/bin/bridge
+++ /dev/null
@@ -1,12 +0,0 @@
-#! /bin/sh
-#
-# Interface to the bridge commands.
-#
-# See commands below $bindir
-#
-set -euf
-
-bindir="$(dirname $(readlink -f "$0"))/../lib/bridge/bin"
-cmd="$bindir/$1"; shift
-
-exec "$cmd" "$@"
diff --git a/bridge/etc/bash_completion.d/bridge b/bridge/etc/bash_completion.d/bridge
deleted file mode 100644
index 86d8a4e2..00000000
--- a/bridge/etc/bash_completion.d/bridge
+++ /dev/null
@@ -1,18 +0,0 @@
-#! /bin/bash
-function comp_bridge() {
-  local cword="${COMP_WORDS[$COMP_CWORD]}"
-  local bindir="$(dirname $(readlink -f "$BASH_SOURCE"))/../../lib/bridge/bin"
-  case $COMP_CWORD in
-    (1)
-      COMPREPLY=( $(cd "$bindir" && ls | grep "^$cword.*") )
-    ;;
-    (2)
-      case "${COMP_WORDS[1]}" in
-        (attach|destroy|paste) 
-          COMPREPLY=( $(bridge list 2>/dev/null | grep "^$cword.*") )
-        ;;
-      esac
-    ;;       
-  esac
-}
-complete -F comp_bridge bridge
diff --git a/bridge/lib/bridge/bin/attach b/bridge/lib/bridge/bin/attach
deleted file mode 100755
index f456f8a6..00000000
--- a/bridge/lib/bridge/bin/attach
+++ /dev/null
@@ -1,10 +0,0 @@
-#! /bin/sh
-#
-# Attach current tty to a session.
-#
-## SYNOPSIS
-#
-#     bridge attach SESSION
-#
-set -euf
-exec tmux -L bridge attach-session -t "$1"
diff --git a/bridge/lib/bridge/bin/create b/bridge/lib/bridge/bin/create
deleted file mode 100755
index 2df8b214..00000000
--- a/bridge/lib/bridge/bin/create
+++ /dev/null
@@ -1,15 +0,0 @@
-#! /bin/sh
-#
-# Create a new session.
-#
-## SYNOPSIS
-#
-#     bridge create SESSION [COMMAND [ARGS ...]]
-#
-# COMMAND defaults to $SHELL (by implication / tmux)
-#
-set -euf
-target="$1"; shift
-tmux -L bridge new-session -d -s "$target" "$@"
-tmux -L bridge set-buffer READY.
-exec "$(dirname $0)/attach" "$target"
diff --git a/bridge/lib/bridge/bin/destroy b/bridge/lib/bridge/bin/destroy
deleted file mode 100755
index dffdbd8a..00000000
--- a/bridge/lib/bridge/bin/destroy
+++ /dev/null
@@ -1,12 +0,0 @@
-#! /bin/sh
-#
-# Destroy a session.
-#
-## SYNOPSIS
-#
-#     bridge destroy SESSION
-#
-# Note that this may destroy similar named sessions (by implication / tmux)
-#
-set -euf
-tmux -L bridge kill-session -t "$1"
diff --git a/bridge/lib/bridge/bin/list b/bridge/lib/bridge/bin/list
deleted file mode 100755
index 0b767a9b..00000000
--- a/bridge/lib/bridge/bin/list
+++ /dev/null
@@ -1,10 +0,0 @@
-#! /bin/sh
-#
-# Write a list of all session names to stdout.
-#
-## SYNOPSIS
-#
-#     bridge list
-#
-set -euf
-exec tmux -L bridge list-sessions | cut -d: -f1
diff --git a/bridge/lib/bridge/bin/paste b/bridge/lib/bridge/bin/paste
deleted file mode 100755
index d3ed1fc5..00000000
--- a/bridge/lib/bridge/bin/paste
+++ /dev/null
@@ -1,30 +0,0 @@
-#! /bin/sh
-#
-# Paste some data to a session.
-#
-## SYNOPSIS
-#
-#     bridge paste SESSION DATA...
-#     bridge paste SESSION < DATA
-#
-set -euf
-
-target="$1"; shift
-
-# paste args or stdin
-if test $# -gt 0; then
-  tmux -L bridge set-buffer -b 0 "$*"
-else
-  # use aux file instead of direct stdin for Vim and when used from $SHELL
-  if test -n "${VIMRUNTIME-}" || tty >/dev/null; then
-    path=`mktemp`
-    trap "rm -f $path" EXIT INT TERM
-    cat>$path
-  else
-    path=-
-  fi
-  tmux -L bridge load-buffer -b 0 $path
-fi
-
-tmux -L bridge paste-buffer -b 0 -t "$target"
-tmux -L bridge   set-buffer -b 0 READY.
diff --git a/bridge/share/doc/bridge/README.md b/bridge/share/doc/bridge/README.md
deleted file mode 100644
index 77c62374..00000000
--- a/bridge/share/doc/bridge/README.md
+++ /dev/null
@@ -1,59 +0,0 @@
-Bridge is a tool to connect your favourite editor and interpreter (or
-similar) for maximum profit.
-
-
-## usage by example
-
-    # start your favourite interpreter, e.g. bc, in a new session
-    bridge create my_fancy_interpreter bc
-
-    # attach a terminal to the session
-    bridge attach my_fancy_interpreter
-
-    # fire up your favourite editor (in another terminal)
-    vim
-    # press <F12> to connect to the session
-    # press return
-    # write interpreter stuff, e.g. 42^23
-    # mark that stuff
-    # press return
-
-    # paste some stuff into the session
-    bridge paste my_fancy_interpreter '1 + 2 + 4^M'
-    # (note that ^M is carriage return obtained by pressing ^V^M AKA C-V C-M)
-
-    # or use bridge as a sink in your pipeline
-    echo 2^20 | bridge paste my_fancy_interpreter
-
-    # you can use tab-completion everywhere (if installed)
-
-
-## install bridge (bourne) shell integration
-
-Hint #1: reboot your system or similar for this to take full effect
-Hint #2: you could also use ~/.profile or similar
-
-    echo 'PATH="${PATH+$PATH:}//bridge/bin"' >> /etc/profile
-
-
-## install bridge Vim integration
-
-Hint: your vim-setup probably differs
-
-    ln -s //bridge/share/vim/plugin/bridge.vim ~/.vim/plugin/
-
-
-## install bridge bash completion
-
-Hint #1: reboot your system or similar for this to take full effect
-Hint #2: this could differ on your system, of course
-Hint #3: you could also use ~/.profile or similar
-
-    ln -s //bridge/etc/bash_completion.d/bridge /etc/bash_completion.d/
-
-
-## install bridge into some usr-like hierarchy [advanced]
-
-    tar -C //bridge -c . |
-        tar --exclude=./README.md -C ~/opt -v --keep-newer-files -x
-
diff --git a/bridge/share/vim/vimfiles/plugin/bridge.vim b/bridge/share/vim/vimfiles/plugin/bridge.vim
deleted file mode 100644
index 91f072d1..00000000
--- a/bridge/share/vim/vimfiles/plugin/bridge.vim
+++ /dev/null
@@ -1,113 +0,0 @@
-" /vim/bridge.vim
-
-if ! exists('s:bridge_name')
-  let s:bridge_name = ""
-endif
-
-fun! Bridge_complete(A,L,P)
-    let a = strpart(a:A,0,a:P)
-    return split(system("bridge list \"".a.".*\""), "\n")
-endfun
-
-fun! Bridge_status()
-  if s:bridge_name == ""
-    return "Disconnected"
-  else
-    return "Connected to " . s:bridge_name
-  else
-  endif
-endfun
-
-setlocal statusline=%<%f\ \(%{Bridge_status()}\)\ %h%m%r%=%-14.(%l,%c%V%)\ %P\ of\ %L\ \(%.45{getcwd()}\)
-
-fun! Bridge_display()
-  if s:bridge_name == ""
-    echo "Not connected!"
-    return
-  endif
-  let cmd = "bridge attach ".s:bridge_name
-  silent exe "!" . cmd
-  redraw!
-endfun
-
-fun! Bridge_connect()
-  if s:bridge_name == ""
-    let m = "boot new"
-  else
-    let m = s:bridge_name
-  endif
-  let name = input("Connect to [".m."]: ", "", "customlist,Bridge_complete")
-  if name == ""
-    if s:bridge_name != ''
-      " stay connected
-      echo
-      return
-    endif
-    let system = input("Command: ", "")
-    if system == ""
-        echo "Aborted!"
-	return
-    endif
-    let name = input("Session name: ", "")
-    if name == ""
-        echo "Aborted!"
-	return
-    endif
-    TODO_boot_new
-  endif
-  if system("bridge list ".name) == ""
-    echo "No such session: ".name
-    return
-  endif
-  let s:bridge_name = name
-  let s:laststatus = &laststatus
-  let &laststatus = 2
-  echo "Connected to " . s:bridge_name
-endfun
-
-fun! Bridge_disconnect(m)
-  if s:bridge_name == ""
-    echo "Not connected!"
-  else
-    let &laststatus = s:laststatus
-    let m = "Disconnected from ".s:bridge_name
-    if a:m != ""
-      let m .= ": ".a:m
-    endif
-    echo m."!"
-    let s:bridge_name = ""
-  endif
-endfun
-
-function! Bridge_paste( data )
-  if a:data == ''
-    echo "Nothing to send!"
-  else
-    let l:data = a:data
-    if exists("g:bridge_prologue") | let l:data = g:bridge_prologue . l:data | endif
-    if exists("g:bridge_epilogue") | let l:data = l:data . g:bridge_epilogue | endif
-    call system("bridge paste " . s:bridge_name, l:data . "\<cr>")
-  endif
-endfunction
-
-nmap <C-F12> :call Bridge_display()<cr>
-nmap [24^ <C-F12>
-nmap <F12> :call Bridge_connect()<cr>
-nmap <S-F12> :call Bridge_disconnect("")<cr>
-nmap [24$ <S-F12>
-
-nmap <leader>el :call Bridge_paste(getline("."))<cr>
-nmap <leader>ec m'ya(:call Bridge_paste(getreg('"'))<cr>`'
-nmap <leader>et m'(y%:call Bridge_paste(getreg('"'))<cr>`'
-
-nmap <leader>ee :call Bridge_paste(input("paste: ", ""))<cr>
-
-" sugar
-nmap <Return> <leader>ec
-
-"" visual shell
-vmap <return> m'y:call Bridge_paste(getreg('"'))<cr>v`'
-vmap <leader>ee :call Bridge_paste(input("paste: ", ""))<cr>
-vmap <leader>et <return>
-
-